|
| |
OSCAR-Omni Spectral Correlator
|
OSCAR
is a portable microcomputer controlled scanning spectral correlator.
It will scan from Audio (40Hz-15KHz), Radio VLF-Microwave
(10KHz-3000MHz) to infrared (850-1070nm) and utilize passive
sound-pattern matching to automatically recognize a surveillance
device. In the Automatic Mode, the unit will continuously scan all
bands for acoustic pattern correlation and then alert you to the
presence of a surveillance device by your choice of a silent alert or
audible one.
The Acoustic Correlator instantly recognizes complex sound patterns
arriving form both the reference and received audio channels. Most room
environments contain many "passive" sounds (air conditioners,
computers, talking, etc.) which OSCAR uses as an acoustic pattern match
between the rooms passive reference sounds and any identical information
received while scanning to provide you with a positive I.D. without
alerting the eavesdropper.
|
|
|
| Featuring |
High Sensitivity Digital Synthesized
Receiver - 10KHz to 3000 MHz coverage including audio and infrared.
Active Antenna array - Selects each element as needed including
tape detection.
Silent Sonic Correlator - Listens to each
signal as needed including tape decision.
Strip Chart Plotter - Provides a hard copy of
spectrum profiles of data for future comparisons.
Record Output - Will store on tape actual
"bug" audio or high threats.
Attache Style Packaging - Folds into a
convenient "carry-on" package.
|
| Specifications |
RF System:
RF Receiver Type: Quad Conversion Super Heterodyne with 3 phase
locked loop synthesizers
RF Frequency Coverage: 10kHz-3GHz
Tuning Resolution: 100Hz
Sensitivity: 0.8µV typical with 15kHz Bandwidth (+15dBm MAX)
Demodulators: AM, FM Wide, FM Narrow. FM SC, SSB/CW
IF Bandwidth: 250kHz, 15kHz, 6kHz
Attenuators: 0, -20dB at active whip, Discone, and VLF-MF input
Dynamic Range: 90dB
Subcarrier Tuning Range: 15kHz-250kHz
Antenna Types: Balanced Loop 10kHz-500kHz (35-45kHz Narrow)
Active Whip: 500kHz-1500MHz
Discone: 1500MHz-3000MHz
Infrared Detector: 10kHz-5MHz, 850-1070nM
AC Carrier Current: 10kHz-5MHz (Balanced Across Power Line)
Control System:
8/16 Bit Microcontroller
128 (512K Optional) Static RAM Memory
Optical Encoder: 128 Pulse/Rev with variable count ratio
Program Key: 64K Byte ROM
Display: 128 x 256 Segment Graphics Supertwist LCD
Printer: 192 Dot Per Line Graphics on 2" wide thermal paper
Audio System:
Frequency Response: 50Hz-15kHz
Voiceband Filter: 300Hz-3000Hz -18dB/Octave
AGC Dynamic Range: 60dB
Output Power: 3W @ 4W
Headphone Output: 0-2V rms @ 220W
Record Output: 50mV rms (with AGC) @ 500W
Remote contact: Normally Open (200mA 32V MAX)
Balanced Auxiliary Input: 0.5V rms Nominal @ 600W
Reference Audio Input: 1mV - 1V rms @ 3.9KW
Sonic Correlator: 50Hz - 15kHz (Frequency Independent)
Audio Alarm: 3 Level Programmable Two Tone Ringer
Squelch: Automatic digital or manual control over full display range
Headphones: Low acoustic leakage, 16W
output limited to 105dBA
Power System:
AC Input: 105-130/210-260VAC, 50-60Hz, 24W
External DC Input: 12-l8VDC, 1A max
Internal Battery: 12.6V, 2.6 Ah 3 hour operation per charge typical
Mechanical:
Size(HxWxD): 6.25 x 18.5 x 14.5 in (47 x 36.8 x 15.9 cm)
Weight: 28 lb. (12.7kg)
|
|
If you have questions or wish to order via
phone, call us toll free inside the US at
1-866-269-7
Or call 615-244-7011
|
|